Benutzer-Werkzeuge

Webseiten-Werkzeuge


tachtler:ntp

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
tachtler:ntp [2013/12/30 11:16] – [Zeitserver optimieren] klaustachtler:ntp [Unbekanntes Datum] (aktuell) – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1
Zeile 1: Zeile 1:
-====== ntp ====== 
- 
-[[tachtler:ntp|{{:tachtler:index:ntp-48x48.png }}]] Das NTP (Network Time Protocol) ist ein Protokoll, entwickelt um die einzelnen Uhren jedes an ein Netzwerk angeschlossenen Computers, synchron zu halten. Alle in diesem Netzwerk befindlichen Computer, haben dann eine __einheitliche__ Zeit, wenn diese an der Verteilung der Zeitinformationen eines sogenannten "Zeitservers", teilnehmen. 
- 
-Es kann unter Umständen sehr wichtig sein, das alle Computer in einem Netzwerk die selbe Zeit zur Verfügung haben, da sonst z.B. der Austausch von DNS Informationen, bei einer zu hoher Zeitabweichung der einzelnen am DNS beteiligten Computer, nicht durchgeführt werden kann. 
- 
-:!: **HINWEIS ** - Nachfolgend soll die Installation eines "Zeitservers" für eine **privates Netzwerk** beschrieben werden! 
- 
-:!: **HINWEIS** - **Der Einsatz von IPv6 soll __NICHT__ genutzt werden!!!** 
- 
-Ab hier werden zur Ausführung nachfolgender Befehle **''root''**-Rechte benötigt. Um der Benutzer ''root'' zu werden, melden Sie sich bitte als ''root''-Benutzer am System an, oder wechseln mit nachfolgendem Befehl zum Benutzer ''root'': 
-<code> 
-$ su - 
-Password: 
-</code> 
- 
-===== Installation ===== 
- 
-Zur Installation eines "Zeitservers" werden nachfolgende Pakete benötigt: 
-  * **''ntp''** - ist im ''base''-Repository von [[http://www.centos.org|CentOS]] enthalten 
-  * **''ntpdate''** - ist ebenfalls im ''base''-Repository von [[http://www.centos.org|CentOS]] enthalten und würde als Abhängigkeit zum Paket ntp sowieso installiert werden. 
- 
-Es sind noch weitere Pakete zu **ntp** verfügbar, welche nicht zum Betrieb eines "Zeitservers" zwingend erforderlich sind. 
- 
-Mit nachfolgendem Befehl, werden die benötigten Pakete installiert: 
-<code> 
-# yum install ntp 
-Loaded plugins: fastestmirror 
-Loading mirror speeds from cached hostfile 
- * base: ftp.plusline.de 
- * extras: ftp.plusline.de 
- * updates: ftp.plusline.de 
-Setting up Install Process 
-Resolving Dependencies 
---> Running transaction check 
----> Package ntp.x86_64 0:4.2.4p8-2.el6 set to be updated 
---> Processing Dependency: ntpdate = 4.2.4p8-2.el6 for package: ntp-4.2.4p8-2.el6.x86_64 
---> Running transaction check 
----> Package ntpdate.x86_64 0:4.2.4p8-2.el6 set to be updated 
---> Finished Dependency Resolution 
- 
-Dependencies Resolved 
- 
-=========================================================================================== 
- Package             Arch               Version                     Repository        Size 
-=========================================================================================== 
-Installing: 
- ntp                 x86_64             4.2.4p8-2.el6               base             445 k 
-Installing for dependencies: 
- ntpdate             x86_64             4.2.4p8-2.el6               base              58 k 
- 
-Transaction Summary 
-=========================================================================================== 
-Install       2 Package(s) 
-Upgrade       0 Package(s) 
- 
-Total download size: 503 k 
-Installed size: 1.2 M 
-Is this ok [y/N]: y 
-Downloading Packages: 
-(1/2): ntp-4.2.4p8-2.el6.x86_64.rpm                                 | 445 kB     00:00      
-(2/2): ntpdate-4.2.4p8-2.el6.x86_64.rpm                              58 kB     00:00      
-------------------------------------------------------------------------------------------- 
-Total                                                      567 kB/s | 503 kB     00:00      
-Running rpm_check_debug 
-Running Transaction Test 
-Transaction Test Succeeded 
-Running Transaction 
-  Installing     : ntpdate-4.2.4p8-2.el6.x86_64                                        1/2  
-  Installing     : ntp-4.2.4p8-2.el6.x86_64                                            2/2  
- 
-Installed: 
-  ntp.x86_64 0:4.2.4p8-2.el6                                                                
- 
-Dependency Installed: 
-  ntpdate.x86_64 0:4.2.4p8-2.el6                                                            
- 
-Complete! 
-</code> 
- 
-Mit nachfolgenden Befehlen kann überprüft werden, welche Inhalte mit den Paketen installiert wurden. 
- 
-Paket **ntp**: 
-<code> 
-# rpm -qil ntp 
-Name        : ntp                          Relocations: (not relocatable) 
-Version     : 4.2.4p8                           Vendor: CentOS 
-Release     : 2.el6                         Build Date: Wed 25 Aug 2010 03:55:14 PM CEST 
-Install Date: Fri 05 Aug 2011 12:01:20 PM CEST      Build Host: c6b2.bsys.dev.centos.org 
-Group       : System Environment/Daemons    Source RPM: ntp-4.2.4p8-2.el6.src.rpm 
-Size        : 1224970                          License: (MIT and BSD and BSD with advertising) and GPLv2 
-Signature   : RSA/8, Sun 03 Jul 2011 06:48:05 AM CEST, Key ID 0946fca2c105b9de 
-Packager    : CentOS BuildSystem <http://bugs.centos.org> 
-URL         : http://www.ntp.org 
-Summary     : The NTP daemon and utilities 
-Description : 
-The Network Time Protocol (NTP) is used to synchronize a computer's 
-time with another reference time source. This package includes ntpd 
-(a daemon which continuously adjusts system time) and utilities used 
-to query and configure the ntpd daemon. 
- 
-Perl scripts ntp-wait and ntptrace are in the ntp-perl package and 
-the ntpdate program is in the ntpdate package. The documentation is 
-in the ntp-doc package. 
-/etc/dhcp/dhclient.d 
-/etc/dhcp/dhclient.d/ntp.sh 
-/etc/ntp.conf 
-/etc/ntp/crypto 
-/etc/ntp/crypto/pw 
-/etc/rc.d/init.d/ntpd 
-/etc/sysconfig/ntpd 
-/usr/bin/ntpstat 
-/usr/sbin/ntp-keygen 
-/usr/sbin/ntpd 
-/usr/sbin/ntpdc 
-/usr/sbin/ntpq 
-/usr/sbin/ntptime 
-/usr/sbin/tickadj 
-/usr/share/doc/ntp-4.2.4p8 
-/usr/share/doc/ntp-4.2.4p8/COPYRIGHT 
-/usr/share/doc/ntp-4.2.4p8/ChangeLog 
-/usr/share/doc/ntp-4.2.4p8/NEWS 
-/usr/share/man/man5/ntp.conf.5.gz 
-/usr/share/man/man5/ntp_acc.5.gz 
-/usr/share/man/man5/ntp_auth.5.gz 
-/usr/share/man/man5/ntp_clock.5.gz 
-/usr/share/man/man5/ntp_misc.5.gz 
-/usr/share/man/man5/ntp_mon.5.gz 
-/usr/share/man/man8/ntp-keygen.8.gz 
-/usr/share/man/man8/ntpd.8.gz 
-/usr/share/man/man8/ntpdc.8.gz 
-/usr/share/man/man8/ntpq.8.gz 
-/usr/share/man/man8/ntpstat.8.gz 
-/usr/share/man/man8/ntptime.8.gz 
-/usr/share/man/man8/tickadj.8.gz 
-/var/lib/ntp 
-/var/lib/ntp/drift 
-/var/log/ntpstats 
-</code> 
- 
-Paket **ntpdate**: 
-<code> 
-# rpm -qil ntpdate 
-Name        : ntpdate                      Relocations: (not relocatable) 
-Version     : 4.2.4p8                           Vendor: CentOS 
-Release     : 2.el6                         Build Date: Wed 25 Aug 2010 03:55:14 PM CEST 
-Install Date: Fri 05 Aug 2011 12:01:18 PM CEST      Build Host: c6b2.bsys.dev.centos.org 
-Group       : Applications/System           Source RPM: ntp-4.2.4p8-2.el6.src.rpm 
-Size        : 75889                            License: (MIT and BSD and BSD with advertising) and GPLv2 
-Signature   : RSA/8, Sun 03 Jul 2011 06:48:06 AM CEST, Key ID 0946fca2c105b9de 
-Packager    : CentOS BuildSystem <http://bugs.centos.org> 
-URL         : http://www.ntp.org 
-Summary     : Utility to set the date and time via NTP 
-Description : 
-ntpdate is a program for retrieving the date and time from 
-NTP servers. 
-/etc/ntp 
-/etc/ntp/keys 
-/etc/ntp/step-tickers 
-/etc/rc.d/init.d/ntpdate 
-/etc/sysconfig/ntpdate 
-/usr/sbin/ntpdate 
-/usr/share/man/man8/ntpdate.8.gz 
-</code> 
- 
-===== Konfiguration ===== 
- 
-Um einen "Zeitserver", welcher als Dienst/Deamon als Hintergrundprozess läuft, auch nach einem Neustart des Servers zur Verfügung zu haben, soll der Dienst/Daemon mit dem Server mit gestartet werden, was mit nachfolgendem Befehl realisiert werden kann: 
-<code> 
-# chkconfig ntpd on 
-</code> 
- 
-Eine Überprüfung, ob beim Neustart des Server der ''ntpd''-Dienst/Deamon wirklich mit gestartet wird, kann mit nachfolgendem Befehl erfolgen und sollte eine Anzeige, wie ebenfalls nachfolgend dargestellt ausgeben: 
-<code> 
-# chkconfig --list | grep ntpd 
-ntpd            0:off   1:off   2:on    3:on    4:on    5:on    6:off 
-ntpdate         0:off   1:off   2:off   3:off   4:off   5:off   6:off 
-</code> 
- 
-==== /etc/ntp.conf ==== 
- 
-In der Konfigurationsdatei 
-  * **''/etc/ntp.conf''** 
-wird der ''ntpd''-Dienst/Daemon konfiguriert. 
- 
-Änderungen und persönliche Anpassungen sind mit einem voranstehenden Kommentar, welche wie nachfolgend dargestellt aussieht 
-<code> 
-# Tachtler 
-</code> 
-gekennzeichnet. 
- 
-Hier die komplette Konfigurationsdatei **''/etc/ntp.conf''**: 
-<code ini> 
-# For more information about this file, see the man pages 
-# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5). 
- 
-driftfile /var/lib/ntp/drift 
- 
-# Permit time synchronization with our time source, but do not 
-# permit the source to query or modify the service on this system. 
-restrict default kod nomodify notrap nopeer noquery 
-# Tachtler 
-# default: restrict -6 default kod nomodify notrap nopeer noquery 
-# restrict -6 default kod nomodify notrap nopeer noquery 
- 
-# Permit all access over the loopback interface.  This could 
-# be tightened as well, but to do so would effect some of 
-# the administrative functions. 
-restrict 127.0.0.1  
-# Tachtler 
-# default: restrict -6 ::1 
-# restrict -6 ::1 
- 
-# Hosts on local network are less restricted. 
-# Tachtler 
-# default: #restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap 
-restrict 192.168.0.0 mask 255.255.255.0 kod nomodify notrap nopeer 
-restrict 192.168.1.0 mask 255.255.255.0 kod nomodify notrap nopeer 
-# Tachtler 
-#restrict 0.rhel.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-#restrict 1.rhel.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-#restrict 2.rhel.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-# Tachtler - near local servers 
-restrict 0.de.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-restrict 1.de.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-restrict 2.de.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
-restrict 3.de.pool.ntp.org mask 255.255.255.255 kod nomodify notrap nopeer noquery 
- 
-# Use public servers from the pool.ntp.org project. 
-# Please consider joining the pool (http://www.pool.ntp.org/join.html). 
-#server 0.rhel.pool.ntp.org 
-#server 1.rhel.pool.ntp.org 
-#server 2.rhel.pool.ntp.org 
-# Tachtler - near local servers 
-server 0.de.pool.ntp.org 
-server 1.de.pool.ntp.org 
-server 2.de.pool.ntp.org 
-server 3.de.pool.ntp.org 
- 
-#broadcast 192.168.1.255 autokey        # broadcast server 
-#broadcastclient                        # broadcast client 
-#broadcast 224.0.1.1 autokey            # multicast server 
-#multicastclient 224.0.1.1              # multicast client 
-#manycastserver 239.255.254.254         # manycast server 
-#manycastclient 239.255.254.254 autokey # manycast client 
- 
-# Undisciplined Local Clock. This is a fake driver intended for backup 
-# and when no outside source of synchronized time is available.  
-# tachtler 
-# default: #server      127.127.1.0     # local clock 
-# default #fudge        127.127.1.0 stratum 10 
-server  127.127.1.0     # local clock 
-fudge   127.127.1.0 stratum 10 
- 
-# Enable public key cryptography. 
-#crypto 
- 
-includefile /etc/ntp/crypto/pw 
- 
-# Key file containing the keys and key identifiers used when operating 
-# with symmetric key cryptography.  
-keys /etc/ntp/keys 
- 
-# Specify the key identifiers which are trusted. 
-#trustedkey 4 8 42 
- 
-# Specify the key identifier to use with the ntpdc utility. 
-#requestkey 8 
- 
-# Specify the key identifier to use with the ntpq utility. 
-#controlkey 8 
- 
-# Enable writing of statistics records. 
-#statistics clockstats cryptostats loopstats peerstats 
- 
-# Tachtler - less logging 
-logconfig=allsync +allclock 
-</code> 
- 
-==== /etc/sysconfig/ntp ==== 
- 
-Da der Einsatz von **IPv6** nicht durchgeführt werden soll, kann mit nachfolgenden Änderungen die Unterstützung für **IPv6** deaktiviert werden und ein "lauschen" auf ggf. definierten **IPv6**-Adressen findet nicht statt: 
- 
-**VOR** - der Ergänzung, mit **IPv6**-Unterstützung: 
-<code ini> 
-# Drop root to id 'ntp:ntp' by default. 
-OPTIONS="-u ntp:ntp -p /var/run/ntpd.pid -g" 
-</code> 
- 
-**NACH** - der Ergänzung, __**ohne**__ **IPv6**-Unterstützung: 
-<code ini> 
-# Drop root to id 'ntp:ntp' by default. 
-OPTIONS="-4 -u ntp:ntp -p /var/run/ntpd.pid -g" 
-</code> 
- 
-:!: **HINWEIS** - **Als einzige Änderung wird hier die Zeichenfolge ''-4'' nach der Bezeichnung ''OPTIONS='' ergänzt!!!** 
- 
-:!: **WICHTIG** - **Diese Änderung ist __NICHT__ ausreichend um IPv6 zu deaktivieren!!!** 
- 
-Nachfolgende Beschreibung zur Deaktivierung von **IPv6** unter [[http://www.centos.org|CentOS]] muss durchgeführt werden: 
-  * **[[tachtler:ipv6-unterstuetzung_deaktivieren|IPv6-Unterstützung deaktivieren]]** 
- 
-==== iptables Regel ===== 
- 
-Damit der "Zeitserver" auch erreichbar ist und nicht die Weitergab der Zeitinformationen via NTP vom Paketfilter ''iptables'' blockiert wird, muss nachfolgende Regel zum ''iptables''-Regelwerk hinzugefügt werden. 
- 
-Um die aktuellen ''iptables''-Regeln erweitern zu können, sollten diese erst einmal aufgelistet werden, was mit nachfolgendem Befehl durchgeführt werden kann: 
-<code> 
-# iptables -L -nv --line-numbers 
-Chain INPUT (policy ACCEPT 0 packets, 0 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination          
-1      141 10524 ACCEPT     all  --  *      *       0.0.0.0/           0.0.0.0/          state RELATED,ESTABLISHED  
-2        0     0 ACCEPT     icmp --  *      *       0.0.0.0/           0.0.0.0/           
-3        0     0 ACCEPT     all  --  lo           0.0.0.0/           0.0.0.0/           
-4        0     0 ACCEPT     tcp  --  *      *       0.0.0.0/           0.0.0.0/          state NEW tcp dpt:22  
-5        1    32 REJECT     all  --  *      *       0.0.0.0/           0.0.0.0/          reject-with icmp-host-prohibited  
- 
-Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination          
-1        0     0 REJECT     all  --  *      *       0.0.0.0/           0.0.0.0/          reject-with icmp-host-prohibited  
- 
-Chain OUTPUT (policy ACCEPT 79 packets, 9140 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination 
-</code> 
- 
-Nachfolgender Befehl, fügt folgende ''iptables''-Regel dem ''iptables''-Regelwerk nach der **Position 4** hinzu, ohne das der Paketfilter angehalten werden muss: 
-  * <code>-A INPUT -p udp --dport 123 -j ACCEPT</code> 
-und hier der Befehl: 
-<code> 
-# iptables -I INPUT 5 -p udp --dport 123 -j ACCEPT 
-</code> 
- 
-Ein erneute Abfrage des ''iptables''-Regelwerts, sollte dann nachfolgend dargestellte Ausgabe ergeben, was mit folgendem Befehl durchgeführt werden kann: 
-<code> 
-# iptables -L -nv --line-numbers 
-Chain INPUT (policy ACCEPT 0 packets, 0 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination          
-1      435 32812 ACCEPT     all  --  *      *       0.0.0.0/           0.0.0.0/          state RELATED,ESTABLISHED  
-2        0     0 ACCEPT     icmp --  *      *       0.0.0.0/           0.0.0.0/           
-3        0     0 ACCEPT     all  --  lo           0.0.0.0/           0.0.0.0/           
-4        0     0 ACCEPT     tcp  --  *      *       0.0.0.0/           0.0.0.0/          state NEW tcp dpt:22  
-5        0     0 ACCEPT     udp  --  *      *       0.0.0.0/           0.0.0.0/          udp dpt:123  
-6        4   128 REJECT     all  --  *      *       0.0.0.0/           0.0.0.0/          reject-with icmp-host-prohibited  
- 
-Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination          
-1        0     0 REJECT     all  --  *      *       0.0.0.0/           0.0.0.0/          reject-with icmp-host-prohibited  
- 
-Chain OUTPUT (policy ACCEPT 12 packets, 1320 bytes) 
-num   pkts bytes target     prot opt in     out     source               destination 
-</code> 
- 
-Die neue Zeile ist an **Position 5** zu sehen, hier nachfolgend zur Verdeutlichung noch einmal dargestellt (**nur relevanter Ausschnitt**): 
-<code> 
-... 
-5        0     0 ACCEPT     udp  --  *      *       0.0.0.0/           0.0.0.0/          udp dpt:123 
-... 
-</code> 
- 
-Um diese ''iptables''-Regel dauerhaft, auch nach einem Neustart des Server, weiterhin im ''iptables''-Regelwerk zu speichern, muss nachfolgend dargestellter Befehl abschließend noch ausgeführt werden: 
-<code> 
-# service iptables save 
-iptables: Saving firewall rules to /etc/sysconfig/iptables: OK  ] 
-</code> 
- 
-===== Zeitserver starten ===== 
- 
-Um einen "Zeitserver" zu starten muss der ''ntpd''-Dienst/Deamon mit nachfolgendem Befehl gestartete werden: 
-<code> 
-# service ntpd start 
-Starting ntpd:                                              OK  ] 
-</code> 
- 
-Ob der "Zeitserver", sprich der ''ntpd''-Dienst/Deamon auch tatsächlich als Hintergrundprozess läuft, kann mit nachfolgendem Befehl überprüft werden (Es sollte eine Ausgabe wie nachfolgend dargestellt, erfolgen - es kommt auf die **zweite** Zeile an!): 
-<code> 
-# ps auxwwwf | grep ntpd 
-root      2352  0.0  0.1 103148   824 pts/0    S+   13:12   0:00                      \_ grep ntpd 
-ntp       2343  0.0  0.3  30048  1544 ?        Ss   13:10   0:00 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g 
-</code> 
- 
-===== Zeitserver Status ===== 
- 
-Um zu überprüfen in wie weit der //offset// bzw. die Abweichung zur aktuell gültigen Zeit ist, kann nachfolgende Abfrage genutzt werden: 
-<code> 
-# ntpq -np4 
-     remote           refid      st t when poll reach   delay   offset  jitter 
-============================================================================== 
-+83.169.43.165   192.53.103.108   2 u   12   64   37   39.836  4012839  30.211 
-+79.143.177.46   129.69.1.153     2 u   19   64   37   29.247  4012857  23.719 
-*188.40.33.81    131.234.137.24   2 u   20   64   37   34.034  4012856  23.537 
-+141.30.228.4    85.214.23.162    3 u   16   64   37   52.294  4012856  24.775 
-+178.63.73.246   129.70.132.33    3 u   15   64   37   34.696  4012860  25.941 
-+129.70.132.32   129.70.130.70    2 u   19   64   37   68.668  4012859  23.887 
- 127.127.1.0     .LOCL.          10 l   21   64   37    0.000    0.000   0.000 
-</code> 
- 
-==== Zeitserver optimieren ==== 
- 
-Falls der //offset//, wie in obigen Beispiel **sehr hoch** ist, würde eine Synchronisierung rein durch den ''ntpd''-Dienst/Deamon relativ lange dauern, die kann durch nachfolgende Befehle kurzum bereinigt werden, damit der //offset// relativ gering ist, zum Teil auch je nach Bandbreite der zur Verfügung stehenden **Internet** Anbindung. 
- 
-Zuerst muss der ''ntpd''-Dienst/Deamon mit nachfolgendem Befehl gestoppt werden: 
-<code> 
-# service ntpd stop 
-Shutting down ntpd:                                        [  OK  ] 
-</code> 
- 
-Anschließend wird die Zeit mit einem der unter dem Befehl **''nbtpq -np''** aufgelisteten Zeitserver synchronisiert, was mit nachfolgendem Befehl realsiert werden kann: 
-<code> 
-# ntpdate 131.188.3.220 
- 5 Aug 15:02:07 ntpdate[2517]: adjust time server 131.188.3.220 offset 0.145769 sec 
-</code> 
-Anschließend wird der ''ntpd''-Dienst/Deamon mit nachfolgendem Befehl wieder gestartet: 
-<code> 
-# service ntpd start 
-Starting ntpd:                                              OK  ] 
-</code> 
- 
-:!: **HINWEIS** - **Warten Sie ca. 10 Minuten, bevor nachfolgende Abfrage durchgeführt wird !!!** 
- 
-Abschließend wir der Befehl zu überprüfen, in wie weit der //offset// bzw. die Abweichung zur aktuell gültigen Zeit ist, noch einmal ausgeführt: 
-<code> 
-# ntpq -np4 
-     remote           refid      st t when poll reach   delay   offset  jitter 
-============================================================================== 
-+46.4.54.78      129.69.1.153     2 u   19   64  377   36.111   28.293  24.654 
-*131.234.137.24  .DCF.            1 u   12   64  377   43.241   24.100  32.154 
-+141.40.103.103  129.69.1.153     2 u   11   64  377   46.183   25.988  30.931 
-+78.47.136.228   141.24.7.240     2 u   10   64  377   32.121   25.555  30.914 
-+95.89.157.176   192.168.100.122  2 u   13   64  377   61.341   28.482  35.455 
-+213.95.21.43    131.76.36.210    2 u    8   64  377   31.485   26.107  27.892 
-+213.9.73.106    134.34.3.18      2 u    7   64  377   39.795   26.240  25.152 
- 127.127.1.0     .LOCL.          10 l    3   64  377    0.000    0.000   0.000 
-</code> 
- 
-===== Zeitserver und NetworkManager ===== 
- 
-Falls der **NetworkManager** auf dem Server mit dem "Zeitserver" zum Einsatz kommt, kann es mit der Standard-Implementierung des **NetworkManagers** zu Problemen kommen. In diesem Falls ist in der Konfigurationsdatei: 
-  * **''/etc/sysconfig/network''** 
-nachfolgender Eintrag zu ergänzen (**nur relevanter Ausschnitt**): 
-<code ini> 
-... 
-NETWORKWAIT=1 
-</code> 
  
tachtler/ntp.1388398565.txt.gz · Zuletzt geändert: 2013/12/30 11:16 von klaus