Benutzer-Werkzeuge

Webseiten-Werkzeuge


tachtler:loganalyzer

Dies ist eine alte Version des Dokuments!


LogAnalyzer

Die Webanwendung phpLogCon war eine Anwendung z.B. zum betrachten von Syslog-Einträgen welche z.B. durch RSyslog in eine MySQL-Datenbank geschrieben werden.

Die Webanwendung LogAnalyzer ist der Nachfolger von phpLogCon.

:!: Daher ist der Austausch des standardmäßig unter CentOS verwendeten „alten“ Syslog-Daemons mit dem Namen syslogd bzw. klogd durch den RSyslog-Daemon mit den Namen rsyslogd zwingend für den Einsatz von phpLogCon / LogAnalyzer erforderlich, da der „alte“ Syslog-Daemon mit dem Namen syslogd z.B. nicht die Fähigkeit besitzt, in eine Datenbank wie MySQL Log-Informationen zu schreiben!

Voraussetzungen

Als Voraussetzung für die Installation von phpLogCon / LogAnalyzer sind folgende Komponenten erforderlich:

Herunterladen

Bevor mit der Installation von phpLogCon / LogAnalyzer begonnen werden kann, sollte eine „stabile“ Version von phpLogCon / LogAnalyzer heruntergeladen werden.

Die aktuelle letzte Version ist die Version loganalyzer-3.0.0.

Installation

Nach dem herunterladen einer Version von LogAnalyzer in z.B. das Verzeichnis /tmp auf den lokalen Rechner, sollte sich folgende Datei

loganalyzer-3.0.0.tar.gz

im Verzeichnis /tmp befinden.

Das heruntergeladene Archiv mit dem Namen loganalyzer-3.0.0.tar.gz kann mit folgendem Befehl entpackt werden:

$ tar xvfz loganalyzer-3.0.0.tar.gz

Anschließend sollte sich ein Verzeichnis mit dem Namen loganalyzer-3.0.0 im Verzeichnis /tmp befinden:

Daraufhin sollte der relevante Teil des Verzeichnises /tmp/loganalyzer-3.0.0/src in das DocumentRoot-Verzeichnis des Apache HTTP Server's mit folgendem Befehl verschoben:

$ mv /tmp/loganalyzer-3.0.0/src /var/www/html/loganalyzer

Abschliessend kann das heruntergeladene Archiv loganalyzer-3.0.0.tar.gz mit folgendem Befehl gelöscht werden:

$ rm /tmp/loganalyzer-3.0.0.tar.gz

Mit nachfolgendem Befehl kann kontrolliert werden, ob sich das Verzeichnis loganalyzer wirklich im Verzeichnis /var/www/html befindet:

$ ll /var/www/html
total 32
drwxr-xr-x 14 1000   1000 4096 Mar 29 16:14 loganalyzer

Es fehlen nun noch die entsprechenden „Dateirechte“ an dem Verzeichnis /var/www/html/loganalyzer, welche durch zwei shell-Scripte die sich im Verzeichnis /tmp/loganalyzer-3.0.0/contrib befinden gesetzt werden sollten. Um diese shell-Scripte zum Einsatz bringen zu können, sollten diese mit folgendem Befehl in das DocumentRoot-Verzeichnis des Apache HTTP Server's kopiert werden:

$ cp /tmp/loganalyzer-3.0.0/contrib/*.sh /var/www/html/loganalyzer

Zur Überprüfung, ob die shell-Scripte sich auch im Verzeichnis /var/www/html/loganalyzer befinden, kann folgender Befehl genutzt werden (configure.sh und secure.sh):

$ ll /var/www/html/loganalyzer
total 240
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 admin
-rw-r--r-- 1 1000 1000  5297 Mar 29 16:10 asktheoracle.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 BitstreamVeraFonts
-rw-r--r-- 1 1000 1000 17164 Mar 29 16:10 chartgenerator.php
drwxr-xr-x 6 1000 1000  4096 Mar 29 16:10 classes
-rw-r--r-- 1 root root    49 Apr 17 11:05 configure.sh
-rw-r--r-- 1 1000 1000  9037 Mar 29 16:10 convert.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 cron
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 css
-rw-r--r-- 1 1000 1000 14947 Mar 29 16:10 details.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:14 doc
-rw-r--r-- 1 1000 1000 12580 Mar 29 16:10 export.php
drwxr-xr-x 5 1000 1000  4096 Mar 29 16:10 images
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 include
-rw-r--r-- 1 1000 1000 37643 Mar 29 16:10 index.php
-rw-r--r-- 1 1000 1000 33310 Mar 29 16:10 install.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 js
drwxr-xr-x 6 1000 1000  4096 Mar 29 16:10 lang
-rw-r--r-- 1 1000 1000  3100 Mar 29 16:10 login.php
-rw-r--r-- 1 1000 1000  6590 Mar 29 16:10 reportgenerator.php
-rw-r--r-- 1 1000 1000  9270 Mar 29 16:10 search.php
-rw-r--r-- 1 root root    31 Apr 17 11:05 secure.sh
-rw-r--r-- 1 1000 1000  4449 Mar 29 16:10 statistics.php
drwxr-xr-x 3 1000 1000  4096 Mar 29 16:10 templates
drwxr-xr-x 4 1000 1000  4096 Mar 29 16:10 themes
-rw-r--r-- 1 1000 1000  3194 Mar 29 16:10 userchange.php

Ab hier werden root-Rechte zur Ausführung der nachfolgenden Befehle benötigt. Um root zu werden geben Sie bitte folgenden Befehl ein:

$ su -
Password: 

Um die shell-Scripte /var/www/html/loganalyzer/configure.sh und /var/www/html/loganalyzer/secure.sh auch ausführen zu können, müssen die entsprechenden Rechte zur Ausführung mit folgendem Befehl noch gesetzt werden:

# chmod u+x /var/www/html/loganalyzer/*.sh

Eine Überprüfung, ob die Rechte richtig gesetzt wurden, kann mit folgendem Befehl erfolgen:

# ll /var/www/html/loganalyzer
total 240
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 admin
-rw-r--r-- 1 1000 1000  5297 Mar 29 16:10 asktheoracle.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 BitstreamVeraFonts
-rw-r--r-- 1 1000 1000 17164 Mar 29 16:10 chartgenerator.php
drwxr-xr-x 6 1000 1000  4096 Mar 29 16:10 classes
-rwxr--r-- 1 root root    49 Apr 17 11:05 configure.sh
-rw-r--r-- 1 1000 1000  9037 Mar 29 16:10 convert.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 cron
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 css
-rw-r--r-- 1 1000 1000 14947 Mar 29 16:10 details.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:14 doc
-rw-r--r-- 1 1000 1000 12580 Mar 29 16:10 export.php
drwxr-xr-x 5 1000 1000  4096 Mar 29 16:10 images
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 include
-rw-r--r-- 1 1000 1000 37643 Mar 29 16:10 index.php
-rw-r--r-- 1 1000 1000 33310 Mar 29 16:10 install.php
drwxr-xr-x 2 1000 1000  4096 Mar 29 16:10 js
drwxr-xr-x 6 1000 1000  4096 Mar 29 16:10 lang
-rw-r--r-- 1 1000 1000  3100 Mar 29 16:10 login.php
-rw-r--r-- 1 1000 1000  6590 Mar 29 16:10 reportgenerator.php
-rw-r--r-- 1 1000 1000  9270 Mar 29 16:10 search.php
-rwxr--r-- 1 root root    31 Apr 17 11:05 secure.sh
-rw-r--r-- 1 1000 1000  4449 Mar 29 16:10 statistics.php
drwxr-xr-x 3 1000 1000  4096 Mar 29 16:10 templates
drwxr-xr-x 4 1000 1000  4096 Mar 29 16:10 themes
-rw-r--r-- 1 1000 1000  3194 Mar 29 16:10 userchange.php

Ein Wechsel in das Verzeichnis /var/www/html/loganalyzer wird mit folgendem Befehl realisiert:

# cd /var/www/html/loganalyzer

Jetzt können beide shell-Scripte wie folgt ausgeführt werden:

./configure.sh
./secure.sh

Am Ende der Installation, müssen noch die entsprechenden „Besitzrechte“ mit folgendem Befehl gesetzt werden:

# chown -R root:apache /var/www/html/loganalyzer

Danach können beide shell-Scripte wieder mit folgendem Befehl gelöschte werden:

# rm /var/www/html/loganalyzer/*.sh
rm: remove regular file `/var/www/html/loganalyzer/configure.sh'? y
rm: remove regular file `/var/www/html/loganalyzer/secure.sh'? y

Konfiguration

Nun befindet sich im Verzeichnis /tmp/loganalyzer-3.0.0 eine Datei mit dem Namen INSTALL, worin alle notwendigen Schritte (in Englisch) erklärt sind, um LogAnalyzer zu installieren und zu konfigurieren.

Dei Web-Anwendung LogAnalyzer beinhaltet einen Installationsprozess, welcher unter folgender URL aufrufbar sein sollte: http://localhost/loganalyzer/install.php.

Als Ergebnis dieses Installationsprozesses, wird folgende Datei erstellt:

/var/www/html/loganalyzer/config.php

welche alle notwendigen Konfigurationen enthält.

Konfiguration einer Quelle

:!: WICHTIG - Dazu ist jedoch temporär bzw. kurzfristig folgende Anpassung notwendig:

# chmod 664 /var/www/html/loganalyzer/config.php

Der Inhalt der Konfigurationsdatei für LogAnalyzer könnte wie folgt aussehen:

<?php
/*
        *********************************************************************
        * LogAnalyzer - http://loganalyzer.adiscon.com
        * -----------------------------------------------------------------
        * Main Configuration File
        *
        * -> Configuration need variables for the Database connection
        *
        * Copyright (C) 2008-2010 Adiscon GmbH.
        *
        * This file is part of LogAnalyzer.
        *
        * LogAnalyzer is free software: you can redistribute it and/or modify
        * it under the terms of the GNU General Public License as published by
        * the Free Software Foundation, either version 3 of the License, or
        * (at your option) any later version.
        *
        * LogAnalyzer is distributed in the hope that it will be useful,
        * but WITHOUT ANY WARRANTY; without even the implied warranty of
        * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        * GNU General Public License for more details.
        *
        * You should have received a copy of the GNU General Public License
        * along with LogAnalyzer. If not, see <http://www.gnu.org/licenses/>.
        *
        * A copy of the GPL can be found in the file "COPYING" in this
        * distribution.
        *********************************************************************
*/
 
// --- Avoid directly accessing this file! 
if ( !defined('IN_PHPLOGCON') )
{
        die('Hacking attempt');
        exit;
}
// --- 
 
// --- UserDB options
/*      If UserDB is enabled, all options will and have to be configured in the database. 
*       All Options below the UserDB options here will not be used, unless a setting
*       is missing in the database. 
*/
$CFG['UserDBEnabled'] = true;
$CFG['UserDBServer'] = 'localhost';
$CFG['UserDBPort'] = 3306;
$CFG['UserDBName'] = 'loganalyzer'; 
$CFG['UserDBPref'] = 'logcon_'; 
$CFG['UserDBUser'] = 'user';
$CFG['UserDBPass'] = 'geheim';
$CFG['UserDBLoginRequired'] = true;
// --- 
 
// --- Misc Options
$CFG['MiscShowDebugMsg'] = 0;                           // if enabled, you will get additional output on certain places
$CFG['MiscDebugToSyslog'] = 0;                          // if enabled, debug messages from LogAnalyzer will be send to syslog on linux, and into the EventLog on Windows
$CFG['MiscShowDebugGridCounter'] = 0;           // Only for debugging purposes, will add a counter column into the grid!
$CFG["MiscShowPageRenderStats"] = 1;            // If enabled, you will see Pagerender Settings
$CFG['MiscEnableGzipCompression'] = 1;          // If enabled, LogAnalyzer will use gzip compression for output, we recommend
                                                                                        // to have this option enabled, it will highly reduce bandwith usage. 
# Tachtler
# default: $CFG['MiscMaxExecutionTime'] = 30;                   // LogAnalyzer will try to overwrite the default script timeout with this value during runtime!
$CFG['MiscMaxExecutionTime'] = 60;                      // LogAnalyzer will try to overwrite the default script timeout with this value during runtime!
                                                                                        // This can of course only work if LogAnalyzer is allowed to changed the script timeout. 
# Tachtler
# default: $CFG['DebugUserLogin'] = 0;                                  // if enabled, you will see additional informations on failed logins
$CFG['DebugUserLogin'] = 1;                                     // if enabled, you will see additional informations on failed logins
// --- 
 
// --- Default Frontend Options 
# Tachtler
# default: $CFG['PrependTitle'] = "";                                   // If set, this text will be prepended withint the title tag
$CFG['PrependTitle'] = "tachtler.net";                                      // If set, this text will be prepended withint the title tag
$CFG['ViewUseTodayYesterday'] = 1;                      // If enabled, the date from today and yesterday is displayed as "today" and "yesterday"
$CFG['ViewMessageCharacterLimit'] = 80;         // Default character limit for the message gets trunscated! 0 means NO trunscation.
$CFG['ViewStringCharacterLimit'] = 30;          // Default character limit for all other string type fields before they get trunscated! 0 means NO trunscation.
$CFG['ViewEntriesPerPage'] = 50;                        // Default number of syslog entries shown per page
$CFG['ViewEnableDetailPopups'] = 1;                     // If enabled, you will see additional Details for each syslog message on mouse over. 
$CFG['ViewDefaultTheme'] = "default";           // This sets the default theme the user is going to see when he opens LogAnalyzer the first time. 
                                                                                        // Currently only "default" and "dark" are available. 
# Tachtler
# default: $CFG['ViewDefaultLanguage'] = "en";                  // Sets the default display language
$CFG['ViewDefaultLanguage'] = "de";                     // Sets the default display language
$CFG['ViewEnableAutoReloadSeconds'] = 0;        // If "ViewEnableAutoReloadSeconds" is set to anything higher the 0 (which means disabled), this means auto reload is enabled by default. 
 
# Tachtler
# default: $CFG['SearchCustomButtonCaption'] = "I'd like to feel sad";  // Default caption for the custom fast search button
$CFG['SearchCustomButtonCaption'] = "Schnellsuche Problem-Meldungen";   // Default caption for the custom fast search button
# Tachtler
# default: $CFG['SearchCustomButtonSearch'] = "error";                                  // Default search string for the custom search button
$CFG['SearchCustomButtonSearch'] = "severity:0,1,2,3,4";                                        // Default search string for the custom search button
 
# Tachtler
# default: $CFG['EnableIPAddressResolve'] = 1;                  // If enabled, IP Addresses inline messages are automatically resolved and the result is added in brackets {} behind the IP Address
$CFG['EnableIPAddressResolve'] = 0;                     // If enabled, IP Addresses inline messages are automatically resolved and the result is added in brackets {} behind the IP Address
$CFG['SuppressDuplicatedMessages'] = 0;         // If enabled, duplicated messages will be suppressed in the main display. 
$CFG['TreatNotFoundFiltersAsTrue'] = 0;         // If you filter / search for messages, and the fields you are filtering for is not found, the filter result is treaten as TRUE! 
$CFG['PopupMenuTimeout'] = 3000;                        // This variable defines the default timeout value for popup menus in milliseconds. (those menus which popup when you click on the value of a field.
$CFG['PhplogconLogoUrl'] = "";                          // Put an Url to a custom toplogo you want to use.
# Tachtler
# default: $CFG['InlineOnlineSearchIcons'] = 1;            // Show online search icons
$CFG['InlineOnlineSearchIcons'] = 0;            // Show online search icons
// ---
 
// --- Custom HTML Code 
$CFG['InjectHtmlHeader'] = "";                          // Use this variable to inject custom html into the html <head> area!
$CFG['InjectBodyHeader'] = "";                          // Use this variable to inject custom html into the begin of the <body> area!
$CFG['InjectBodyFooter'] = "";                          // Use this variable to inject custom html into the end of the <body> area!
// ---
 
// --- Define which fields you want to see 
//$CFG['ShowMessage'] = true;                                   // If enabled, the Message column will be appended to the columns list.
//Eventlog based fields: $CFG['Columns'] = array ( SYSLOG_DATE, SYSLOG_HOST, SYSLOG_EVENT_LOGTYPE, SYSLOG_EVENT_SOURCE, /*SYSLOG_EVENT_CATEGORY, */SYSLOG_EVENT_ID, SYSLOG_MESSAGE );
//$CFG['Columns'] = array ( SYSLOG_DATE, SYSLOG_FACILITY, SYSLOG_SEVERITY, SYSLOG_HOST, SYSLOG_SYSLOGTAG, SYSLOG_MESSAGETYPE, SYSLOG_MESSAGE );
$CFG['DefaultViewsID'] = "";
// ---
 
// --- Predefined Searches! 
$CFG['Search'][] = array ( "DisplayName" => "Syslog Warnings and Errors", "SearchQuery" => "filter=severity%3A0%2C1%2C2%2C3%2C4&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "Syslog Errors", "SearchQuery" => "filter=severity%3A0%2C1%2C2%2C3&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from the last hour", "SearchQuery" => "filter=datelastx%3A1&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 12 hours", "SearchQuery" => "filter=datelastx%3A2&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 24 hours", "SearchQuery" => "filter=datelastx%3A3&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 7 days", "SearchQuery" => "filter=datelastx%3A4&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 31 days", "SearchQuery" => "filter=datelastx%3A5&search=Search" );
// $CFG['Search'][] = array ( "DisplayName" => "", "SearchQuery" => "" );
// ---
 
// --- Predefined Charts!
$CFG['Charts'][] = array ( "DisplayName" => "Top Hosts", "chart_type" => CHART_BARS_HORIZONTAL, "chart_width" => 400, "chart_field" => SYSLOG_HOST, "maxrecords" => 10, "showpercent" => 0, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "SyslogTags", "chart_type" => CHART_CAKE, "chart_width" => 400, "chart_field" => SYSLOG_SYSLOGTAG, "maxrecords" => 10, "showpercent" => 0, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "Severity Occurences", "chart_type" => CHART_BARS_VERTICAL, "chart_width" => 400, "chart_field" => SYSLOG_SEVERITY, "maxrecords" => 10, "showpercent" => 1, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "Usage by Day", "chart_type" => CHART_CAKE, "chart_width" => 400, "chart_field" => SYSLOG_DATE, "maxrecords" => 10, "showpercent" => 1, "chart_enabled" => 1 );
// ---
 
// --- Source Options
/* Example for DiskType Source:
        $CFG['Sources']['Source1']['ID'] = "Source1";
        $CFG['Sources']['Source1']['Name'] = "Syslog Disk File";
        $CFG['Sources']['Source1']['Description'] = "More details you want to see about this source";
        $CFG['Sources']['Source1']['SourceType'] = SOURCE_DISK;
        $CFG['Sources']['Source1']['LogLineType'] = "syslog";
        $CFG['Sources']['Source1']['MsgParserList'] = "";
        $CFG['Sources']['Source1']['MsgNormalize'] = 0;
        $CFG['Sources']['Source1']['DiskFile'] = "/var/log/syslog";
        $CFG['Sources']['Source1']['ViewID'] = "SYSLOG";
 
        $CFG['Sources']['Source2']['ID'] = "Source5";
        $CFG['Sources']['Source2']['Name'] = "WinSyslog DB";
        $CFG['Sources']['Source1']['Description'] = "";
        $CFG['Sources']['Source2']['SourceType'] = SOURCE_DB;
        $CFG['Sources']['Source1']['MsgParserList'] = "";
        $CFG['Sources']['Source2']['DBTableType'] = "winsyslog";
        $CFG['Sources']['Source2']['DBType'] = DB_MYSQL;
        $CFG['Sources']['Source2']['DBServer'] = "localhost";
        $CFG['Sources']['Source2']['DBName'] = "loganalyzer";
        $CFG['Sources']['Source2']['DBUser'] = "root";
        $CFG['Sources']['Source2']['DBPassword'] = "";
        $CFG['Sources']['Source2']['DBTableName'] = "systemevents";
        $CFG['Sources']['Source2']['ViewID'] = "SYSLOG";
*/
 
$CFG['DefaultSourceID'] = 'Source1';
 
$CFG['Sources']['Source1']['ID'] = 'Source1';
$CFG['Sources']['Source1']['Name'] = 'dbserver.tachtler.net';
$CFG['Sources']['Source1']['ViewID'] = 'SYSLOG';
$CFG['Sources']['Source1']['SourceType'] = SOURCE_DB;
$CFG['Sources']['Source1']['DBTableType'] = 'monitorware';
$CFG['Sources']['Source1']['DBType'] = DB_MYSQL;
$CFG['Sources']['Source1']['DBServer'] = 'localhost';
$CFG['Sources']['Source1']['DBName'] = 'loganalyzer';
$CFG['Sources']['Source1']['DBUser'] = 'user';
$CFG['Sources']['Source1']['DBPassword'] = 'geheim';
$CFG['Sources']['Source1']['DBTableName'] = 'SystemEvents';
$CFG['Sources']['Source1']['DBEnableRowCounting'] = false;
 
// --- 
 
?>

:!: WICHTIG - Abschließend ist die temporäre bzw. kurzfristige Anpassung wieder rückgängig zu machen:

# chmod 644 /var/www/html/loganalyzer/config.php

Konfiguration mehrere Quellen

:!: WICHTIG - Dazu ist jedoch temporär bzw. kurzfristig folgende Anpassung notwendig:

# chmod 664 /var/www/html/loganalyzer/config.php

Der Inhalt der Konfigurationsdatei für LogAnalyzer könnte wie folgt aussehen:

<?php
/*
        *********************************************************************
        * LogAnalyzer - http://loganalyzer.adiscon.com
        * -----------------------------------------------------------------
        * Main Configuration File
        *
        * -> Configuration need variables for the Database connection
        *
        * Copyright (C) 2008-2010 Adiscon GmbH.
        *
        * This file is part of LogAnalyzer.
        *
        * LogAnalyzer is free software: you can redistribute it and/or modify
        * it under the terms of the GNU General Public License as published by
        * the Free Software Foundation, either version 3 of the License, or
        * (at your option) any later version.
        *
        * LogAnalyzer is distributed in the hope that it will be useful,
        * but WITHOUT ANY WARRANTY; without even the implied warranty of
        * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        * GNU General Public License for more details.
        *
        * You should have received a copy of the GNU General Public License
        * along with LogAnalyzer. If not, see <http://www.gnu.org/licenses/>.
        *
        * A copy of the GPL can be found in the file "COPYING" in this
        * distribution.
        *********************************************************************
*/

// --- Avoid directly accessing this file! 
if ( !defined('IN_PHPLOGCON') )
{
        die('Hacking attempt');
        exit;
}
// --- 

// --- UserDB options
/*      If UserDB is enabled, all options will and have to be configured in the database. 
*       All Options below the UserDB options here will not be used, unless a setting
*       is missing in the database. 
*/
$CFG['UserDBEnabled'] = true;
$CFG['UserDBServer'] = 'localhost';
$CFG['UserDBPort'] = 3306;
$CFG['UserDBName'] = 'loganalyzer'; 
$CFG['UserDBPref'] = 'logcon_'; 
$CFG['UserDBUser'] = 'user';
$CFG['UserDBPass'] = 'geheim';
$CFG['UserDBLoginRequired'] = true;
// --- 

// --- Misc Options
$CFG['MiscShowDebugMsg'] = 0;                           // if enabled, you will get additional output on certain places
$CFG['MiscDebugToSyslog'] = 0;                          // if enabled, debug messages from LogAnalyzer will be send to syslog on linux, and into the EventLog on Windows
$CFG['MiscShowDebugGridCounter'] = 0;           // Only for debugging purposes, will add a counter column into the grid!
$CFG["MiscShowPageRenderStats"] = 1;            // If enabled, you will see Pagerender Settings
$CFG['MiscEnableGzipCompression'] = 1;          // If enabled, LogAnalyzer will use gzip compression for output, we recommend
                                                                                        // to have this option enabled, it will highly reduce bandwith usage. 
// Tachtler
// default: $CFG['MiscMaxExecutionTime'] = 30;                  // LogAnalyzer will try to overwrite the default script timeout with this value during runtime!
$CFG['MiscMaxExecutionTime'] = 60;                      // LogAnalyzer will try to overwrite the default script timeout with this value during runtime!
                                                                                        // This can of course only work if LogAnalyzer is allowed to changed the script timeout. 
$CFG['DebugUserLogin'] = 0;                                     // if enabled, you will see additional informations on failed logins
// --- 

// --- Default Frontend Options 
// Tachtler
// default: $CFG['PrependTitle'] = "";                                  // If set, this text will be prepended withint the title tag
$CFG['PrependTitle'] = "nss.tachtler.net";                                      // If set, this text will be prepended withint the title tag
$CFG['ViewUseTodayYesterday'] = 1;                      // If enabled, the date from today and yesterday is displayed as "today" and "yesterday"
$CFG['ViewMessageCharacterLimit'] = 80;         // Default character limit for the message gets trunscated! 0 means NO trunscation.
$CFG['ViewStringCharacterLimit'] = 30;          // Default character limit for all other string type fields before they get trunscated! 0 means NO trunscation.
$CFG['ViewEntriesPerPage'] = 50;                        // Default number of syslog entries shown per page
// Tachtler
// $CFG['ViewEnableDetailPopups'] = 0;                  // If enabled, you will see additional Details for each syslog message on mouse over. 
$CFG['ViewEnableDetailPopups'] = 1;                     // If enabled, you will see additional Details for each syslog message on mouse over. 
$CFG['ViewDefaultTheme'] = "default";           // This sets the default theme the user is going to see when he opens LogAnalyzer the first time. 
                                                                                        // Currently only "default" and "dark" are available. 
// Tachtler
// default: $CFG['ViewDefaultLanguage'] = "en";                 // Sets the default display language
$CFG['ViewDefaultLanguage'] = "de";                     // Sets the default display language
$CFG['ViewEnableAutoReloadSeconds'] = 0;        // If "ViewEnableAutoReloadSeconds" is set to anything higher the 0 (which means disabled), this means auto reload is enabled by default. 

// Tachtler
// default: $CFG['SearchCustomButtonCaption'] = "I'd like to feel sad"; // Default caption for the custom fast search button
$CFG['SearchCustomButtonCaption'] = "Schnellsuche Problem-Meldungen";   // Default caption for the custom fast search button
// Tachtler
// default: $CFG['SearchCustomButtonSearch'] = "error";                                 // Default search string for the custom search button
$CFG['SearchCustomButtonSearch'] = "severity:0,1,2,3,4";                                        // Default search string for the custom search button

$CFG['EnableIPAddressResolve'] = 0;                     // If enabled, IP Addresses inline messages are automatically resolved and the result is added in brackets {} behind the IP Address
$CFG['SuppressDuplicatedMessages'] = 0;         // If enabled, duplicated messages will be suppressed in the main display. 
$CFG['TreatNotFoundFiltersAsTrue'] = 0;         // If you filter / search for messages, and the fields you are filtering for is not found, the filter result is treaten as TRUE! 
$CFG['PopupMenuTimeout'] = 3000;                        // This variable defines the default timeout value for popup menus in milliseconds. (those menus which popup when you click on the value of a field.
$CFG['PhplogconLogoUrl'] = "";                          // Put an Url to a custom toplogo you want to use.
// Tachtler
// default: $CFG['InlineOnlineSearchIcons'] = 1;                // Show online search icons
$CFG['InlineOnlineSearchIcons'] = 0;            // Show online search icons
$CFG['UseProxyServerForRemoteQueries'] = "";// If empty no proxy server will be used. If set to a proxy server url like 127.0.0.1:8080, LogAnalyzer will use this server for url queries like the updatecheck. 
// ---

// --- Custom HTML Code 
$CFG['InjectHtmlHeader'] = "";                          // Use this variable to inject custom html into the html <head> area!
$CFG['InjectBodyHeader'] = "";                          // Use this variable to inject custom html into the begin of the <body> area!
$CFG['InjectBodyFooter'] = "";                          // Use this variable to inject custom html into the end of the <body> area!
// ---

// --- Define which fields you want to see 
//$CFG['ShowMessage'] = true;                                   // If enabled, the Message column will be appended to the columns list.
//Eventlog based fields: $CFG['Columns'] = array ( SYSLOG_DATE, SYSLOG_HOST, SYSLOG_EVENT_LOGTYPE, SYSLOG_EVENT_SOURCE, /*SYSLOG_EVENT_CATEGORY, */SYSLOG_EVENT_ID, SYSLOG_MESSAGE );
//$CFG['Columns'] = array ( SYSLOG_DATE, SYSLOG_FACILITY, SYSLOG_SEVERITY, SYSLOG_HOST, SYSLOG_SYSLOGTAG, SYSLOG_MESSAGETYPE, SYSLOG_MESSAGE );
$CFG['DefaultViewsID'] = "";
// ---

// --- Predefined Searches! 
$CFG['Search'][] = array ( "DisplayName" => "Syslog Warnings and Errors", "SearchQuery" => "filter=severity%3A0%2C1%2C2%2C3%2C4&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "Syslog Errors", "SearchQuery" => "filter=severity%3A0%2C1%2C2%2C3&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from the last hour", "SearchQuery" => "filter=datelastx%3A1&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 12 hours", "SearchQuery" => "filter=datelastx%3A2&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 24 hours", "SearchQuery" => "filter=datelastx%3A3&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 7 days", "SearchQuery" => "filter=datelastx%3A4&search=Search" );
$CFG['Search'][] = array ( "DisplayName" => "All messages from last 31 days", "SearchQuery" => "filter=datelastx%3A5&search=Search" );
// $CFG['Search'][] = array ( "DisplayName" => "", "SearchQuery" => "" );
// ---

// --- Predefined Charts!
$CFG['Charts'][] = array ( "DisplayName" => "Top Hosts", "chart_type" => CHART_BARS_HORIZONTAL, "chart_width" => 400, "chart_field" => SYSLOG_HOST, "maxrecords" => 10, "showpercent" => 0, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "SyslogTags", "chart_type" => CHART_CAKE, "chart_width" => 400, "chart_field" => SYSLOG_SYSLOGTAG, "maxrecords" => 10, "showpercent" => 0, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "Severity Occurences", "chart_type" => CHART_BARS_VERTICAL, "chart_width" => 400, "chart_field" => SYSLOG_SEVERITY, "maxrecords" => 10, "showpercent" => 1, "chart_enabled" => 1 );
$CFG['Charts'][] = array ( "DisplayName" => "Usage by Day", "chart_type" => CHART_CAKE, "chart_width" => 400, "chart_field" => SYSLOG_DATE, "maxrecords" => 10, "showpercent" => 1, "chart_enabled" => 1 );
// ---

// --- Source Options
/* Example for DiskType Source:
        $CFG['Sources']['Source1']['ID'] = "Source1";
        $CFG['Sources']['Source1']['Name'] = "Syslog Disk File";
        $CFG['Sources']['Source1']['Description'] = "More details you want to see about this source";
        $CFG['Sources']['Source1']['SourceType'] = SOURCE_DISK;
        $CFG['Sources']['Source1']['LogLineType'] = "syslog";
        $CFG['Sources']['Source1']['MsgParserList'] = "";
        $CFG['Sources']['Source1']['MsgNormalize'] = 0;
        $CFG['Sources']['Source1']['DiskFile'] = "/var/log/syslog";
        $CFG['Sources']['Source1']['ViewID'] = "SYSLOG";

        $CFG['Sources']['Source2']['ID'] = "Source5";
        $CFG['Sources']['Source2']['Name'] = "WinSyslog DB";
        $CFG['Sources']['Source1']['Description'] = "";
        $CFG['Sources']['Source2']['SourceType'] = SOURCE_DB;
        $CFG['Sources']['Source1']['MsgParserList'] = "";
        $CFG['Sources']['Source2']['DBTableType'] = "winsyslog";
        $CFG['Sources']['Source2']['DBType'] = DB_MYSQL;
        $CFG['Sources']['Source2']['DBServer'] = "localhost";
        $CFG['Sources']['Source2']['DBName'] = "loganalyzer";
        $CFG['Sources']['Source2']['DBUser'] = "root";
        $CFG['Sources']['Source2']['DBPassword'] = "";
        $CFG['Sources']['Source2']['DBTableName'] = "systemevents";
        $CFG['Sources']['Source2']['ViewID'] = "SYSLOG";
*/

$CFG['DefaultSourceID'] = 'Source1';

$CFG['Sources']['Source1']['ID'] = 'Source1';
$CFG['Sources']['Source1']['Name'] = 'nss.tachtler.net';
$CFG['Sources']['Source1']['ViewID'] = 'SYSLOG';
$CFG['Sources']['Source1']['SourceType'] = SOURCE_DB;
$CFG['Sources']['Source1']['DBTableType'] = 'monitorware';
$CFG['Sources']['Source1']['DBType'] = DB_MYSQL;
$CFG['Sources']['Source1']['DBServer'] = 'localhost';
$CFG['Sources']['Source1']['DBName'] = 'loganalyzer';
$CFG['Sources']['Source1']['DBUser'] = 'user';
$CFG['Sources']['Source1']['DBPassword'] = 'geheim';
$CFG['Sources']['Source1']['DBTableName'] = 'SystemEvents';
$CFG['Sources']['Source1']['DBEnableRowCounting'] = false;
$CFG['Sources']['Source1']['defaultfilter'] = 'source:=nss';

$CFG['Sources']['Source2']['ID'] = 'Source2';
$CFG['Sources']['Source2']['Name'] = 'receiver.tachtler.net';
$CFG['Sources']['Source2']['ViewID'] = 'SYSLOG';
$CFG['Sources']['Source2']['SourceType'] = SOURCE_DB;
$CFG['Sources']['Source2']['DBTableType'] = 'monitorware';
$CFG['Sources']['Source2']['DBType'] = DB_MYSQL;
$CFG['Sources']['Source2']['DBServer'] = 'localhost';
$CFG['Sources']['Source2']['DBName'] = 'loganalyzer';
$CFG['Sources']['Source2']['DBUser'] = 'user';
$CFG['Sources']['Source2']['DBPassword'] = 'geheim';
$CFG['Sources']['Source2']['DBTableName'] = 'SystemEvents';
$CFG['Sources']['Source2']['DBEnableRowCounting'] = false;
$CFG['Sources']['Source2']['defaultfilter'] = 'source:=receiver';

$CFG['Sources']['Source3']['ID'] = 'Source3';
$CFG['Sources']['Source3']['Name'] = 'router.tachtler.net';
$CFG['Sources']['Source3']['ViewID'] = 'SYSLOG';
$CFG['Sources']['Source3']['SourceType'] = SOURCE_DB;
$CFG['Sources']['Source3']['DBTableType'] = 'monitorware';
$CFG['Sources']['Source3']['DBType'] = DB_MYSQL;
$CFG['Sources']['Source3']['DBServer'] = 'localhost';
$CFG['Sources']['Source3']['DBName'] = 'loganalyzer';
$CFG['Sources']['Source3']['DBUser'] = 'user';
$CFG['Sources']['Source3']['DBPassword'] = 'geheim';
$CFG['Sources']['Source3']['DBTableName'] = 'SystemEvents';
$CFG['Sources']['Source3']['DBEnableRowCounting'] = false;
$CFG['Sources']['Source3']['defaultfilter'] = 'source:=router';

// --- 

?>

:!: WICHTIG - Abschließend ist die temporäre bzw. kurzfristige Anpassung wieder rückgängig zu machen:

# chmod 644 /var/www/html/loganalyzer/config.php
Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie dem Speichern von Cookies auf Ihrem Computer zu. Außerdem bestätigen Sie, dass Sie unsere Datenschutzbestimmungen gelesen und verstanden haben. Wenn Sie nicht einverstanden sind, verlassen Sie die Website.Weitere Information
tachtler/loganalyzer.1346231092.txt.gz · Zuletzt geändert: 2012/08/29 11:04 von klaus